Recalling Previous Job Settings; R Ecalling Previous Job Settings - Konica Minolta 7165 Instruction Manual

7155e033v1.fm 50 ページ ２００１年１１月２８日 水曜日 午前１１時１５分

Recalling Previous Job Settings

Follow the procedure below to copy with a previous job's settings.
1.
Press [ JOB MEMORY ] on the control panel.
The Job No. Selection Screen will be displayed.
2.
Touch PRE-JOB RECALL .
3.
Touch OK to return to the Basic Screen.
The settings of the previous output job is recalled on the screen.
4.
Change the settings recalled on the screen, if desired.
5.
When all settings are acceptable, position original(s) in the
document feeder or on the platen glass, then press [ START ].
3-50
FOR DETAILS
• Only the last-completed output job settings can be recalled as the
previous job settings. Non-complete job or reserve job settings cannot
be recalled, even if the setting operations have been made last.
• The previous job settings can be recalled, even after the machine
power is turned off then on.