Konica Minolta 7165 Instruction Manual page 12

7155econtv1.fm x ページ ２００１年１１月２８日 水曜日 午後５時３１分
• Lens Mode (RE, Zoom)
Selects fixed ratios, four reduction, four enlargement, and three user-set
ratios.
Zoom ratios can be selected from 25% ~ 400% in 1% increments.
• Machine Status Confirmation
Displays the current machine status on LCD for confirmation.
• Manual Shut-off
Shuts off the machine's power when pressing [ POWER SAVER ON/OFF ] on
the control panel.
• Mixed Original
Copies mixed size originals from the document feeder in APS or AMS mode.
APS automatically selects the paper size of each original. AMS mode allows
you to select one paper size for all originals.
• Non-Image Area Erase
When copying from the platen glass when the document cover is open,
copies only the image area and not the exposed area of glass, which would
otherwise copy as black.
• Non STD Size for Multi-Sheet Bypass Tray
Enters the special paper size to be loaded on the Multi-sheet bypass tray
using the touch screen keypad in order to avoid paper misfeed.
• Non STD Size for Original
Identifies the special original size which the 7155/7165 cannot detect, in
order to select the optimal paper size for copying or printing.
• OHP Interleave
When using transparency film, select either Blank or Copy Sheet
Interleaving mode for each original.
• Output Mode for Machine with FS-110/210 Finisher Installed:
Non-Sort, Sort, Staple-Sort, and Group modes using the primary (main)
tray
Non-Sort Face Down exit, Non-Sort Face Up exit, Group Face Down exit,
and Group Face Up exit modes using the secondary (sub) tray
Fold, Stitch & Fold, and Three-Fold modes using the booklet tray (FS-210
only)
Selects an output tray and output mode on the Output Mode popup menu.
• Output for Machine with no Finisher Installed:
Non-sort, Rotation sort, Group, and Rotation group modes are available in
combination with Face down or Face up exit.
Selects an output mode on the Output Mode popup menu.
x
Features of the Konica 7155/7165 (continued)