User Setting Mode; U Ser Setting Mode; User Density Level 1 Setting - Konica Minolta 7165 Instruction Manual

7155e131v1.fm 12 ページ ２００１年１１月２７日 火曜日 午後４時５４分

[3] User Setting Mode

Set two userset density levels and three USERSETs of magnification.

[1] User Density Level 1 Setting

Output copying samples from 16 density levels from Lighter to Normal or
Normal to Darker, then select the desired exposure and program it as
USER1.
The programmed copy density can be recalled by selecting USER1 on the
Basic Screen.
User Setting Mode Menu Screen
Procedure
1 Touch [3] User setting mode on the Key Operator Mode Screen to display the
User Setting Mode Menu Screen.
2 Touch [1] User density level 1 setting to display the User Density Level 1
Setting Screen.
3 Place the original on the platen glass or in the RADF.
4 Touch Darker or Lighter to select the density level to be programmed.
5 Touch No.1 1~4 , No.2 5~8 , No.3 9~12 , No.4 13~16 , or Set density ## , then
press [ START ]. The density level sample sheet will be output.
6 Select the desired exposure from the sample sheet(s), then enter the density
level No. by using the touch screen keypad.
7 Touch OK to complete the setting and return to the User Setting Mode Menu
Screen.
8 Touch RETURN to restore the Key Operator Mode Screen.
9 If no further changes are required, touch RETURN to restore the Basic Screen
to perform copying operations.
13-12
User Density Level 1 Setting Screen