Loading Paper in Tray 3
1.
Withdraw tray 3.
See p. 2-2 to check positions of each tray.
Do not withdraw the tray forcibly; otherwise you may be injured.
2.
Open the paper feed roller.
3.
Place some paper on the tray with the curl side turning up.
Load paper aligning it to the right side of the tray.
4.
While pressing the release knob, move the rear side guide plate
against the paper.
Release the release knob to lock the side guide plate.
• Be sure that the side guide plates are securely aligned to the paper;
otherwise the machine cannot detect the correct paper size, or copies
may not be punched in position.
• Do not move the rear and front side guide plates while holding the
upper portion of them, otherwise they may be damaged.
HINT
Please Be Reminded!
Please Be Reminded!
Loading Paper (continued)
2
Machine
Information
Machine
Configuration
Turn On/Off
the Power
Loading
Paper
Changing
Paper Size
2-21