Positioning Original On Platen Glass - Konica Minolta 7165 Instruction Manual

Positioning Original on Platen Glass

Use the platen glass when originals are not suitable for use with the
document feeder, e.g., when size is incompatible, or when originals are
folded, stapled, torn, or in generally poor condition.
1.
Raise the document feeder.
Place original FACE DOWN in the left rear corner, aligning the edge with the
left measuring guide.
2.
Gently close the document feeder to prevent the original from
shifting on the glass.
When selecting Dual Page, Non-Image Area Erase, AUTO mode in
Repeat, or AUTO Layout, DO NOT CLOSE the document feeder. For
details on each function, see Section 9.
Do not place too heavy originals, or do not press strongly when
thick original is placed and is under pressure of RADF;
otherwise the glass may be broken and you may be injured.
Positioning Originals (continued)
Please Be Reminded!
CAUTION
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size
Lens Mode
Density
1s1, 2s2
2s1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
FS-110/210
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-5