Making Double-Sided Copy (1S2, 2S2); Using Radf; Output Modes; Binding Mode - Konica Minolta 7165 Instruction Manual

Hide thumbs Also See for 7165:

Table of Contents

Making Double-Sided Copy (1s2, 2s2)

The Basic Screen is initially set to 1s1 copy mode to make single-sided

copies from single-sided originals.

Follow the procedure below to make double-sided copies from the originals

scanned from the document feeder or from the platen glass.

Select the copy mode according to the original type (single-sided or double-

Double-sided original

Touch 1 s s s s 2 or 2 s s s s 2 on the Basic Screen to highlight it.

When starting a new copying job, be sure to close the RADF securely,

then press [AUTO RESET].

Single-sided original

Please Be Reminded!

Setting Print

Set Job During

Output without

Previous Job

& Proof Copy

Table of Contents