Lock/Delete Job Memory; L Ock / Delete Job Memory - Konica Minolta 7165 Instruction Manual

7155e132v1.fm 22 ページ ２００１年１１月２７日 火曜日 午後４時５８分

[5] Lock/Delete Job Memory

Use this function to lock/unlock or delete a Job that has been programmed.
A locked Job is indicated by a lock icon (
Screen.
The settings of a locked job cannot be changed.
❒ Setting options: Lock Job memory; Unlock Job memory; Delete Job memory
❒ Lock/delete is available for all 30 stored jobs
❒ Job lock is available only for named jobs
❒ A blank key indicates that no job is programmed
❒ ✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽ indicates that a job is programmed but unnamed
Key Operator Mode Screen
Procedure
1 Touch [5] Lock/delete job memory on the Key Operator Mode Screen to
display the Lock/Delete Job Memory Screen.
2 To lock/unlock a job memory;
(1) Touch the key on the left side of the desired job number. Use arrow keys to
scroll to the desired job number, if required.
(2) The lock icon will appear on the touched key to show that the selected job is
locked. The previously locked job will be unlocked when selected, and the
lock icon on the touched key will disappear.
To delete a job memory;
(1) Touch the job number you want to delete. Use arrow keys to scroll to the
desired job number, if required.
(2) Touch DELETE. Selected programs and the name will be deleted from the
job memory.
3 Touch OK to complete the setting and return to the Key Operator Mode Screen.
4 If no further changes are required, touch RETURN to restore the Basic Screen
to perform copying operations.
13-22
) on the Lock/Delete Job Memory
Lock/Delete Job Memory Screen