Checking Feature Selections And Proof Copying; C Hecking Feature Selections And Proof Copying - Konica Minolta 7165 Instruction Manual

Checking Feature Selections and Proof Copying

Use the Check mode to confirm copying selections before starting print
operation.
In this mode, use Proof copy to produce a sample of the copied set before
making multiple copies. This is a convenient and cost effective way of
viewing the results of the following copying selections.
• Copying conditions using Store mode
• Sheet/Cover insertion
• Chapter
• Combination
>>> Specifications for Check Mode and Proof Copy<<<
❒ Proof copy is available when using RADF, or Platen store mode for multiple
originals.
❒ Proof copy cannot be used for testing the Userset density.
❒ Proof copy is unavailable with Group output mode.
1.
Select the desired copy conditions and enter the desired print
quantity.
When starting a new copying job, be sure to close the RADF securely,
then press [AUTO RESET].
2.
Position original(s).
See p. 3-2 to p. 3-5 for details on positioning originals.
3.
Press [CHECK] on the control panel.
The Check Screen will be displayed.
Please Be Reminded!
HINT
COPY
SCAN / SERVER
PRINT
CHECK HELP
JOB MEMORY
AUTO RESET
COUNTER
• Booklet
• Image insert
• Dual page
• Program job
CLEAR QTY
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size
Lens Mode
Density
1s1, 2s2
2s1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
FS-110/210
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-51