How To Access The Weekly Timer Setting Mode - Konica Minolta 7165 Instruction Manual

7155e132v1.fm 28 ページ ２００１年１１月２７日 火曜日 午後４時５８分

How to Access the Weekly Timer Setting Mode

Key Operator Mode Screen
Procedure
1 Touch [9] Weekly timer on the Key Operator Mode Screen.
The Weekly Timer Master Key Code Screen displays when the 4-digit Weekly
Timer master key code is set by service.
Otherwise, the Weekly Timer Setting Menu Screen displays without the code
requirement.
2 If the Weekly Timer Master Key Code Screen is displayed, use the keypad on
the touch screen to enter your 4-digit Weekly Timer master key code, then touch
OK to display the Weekly Timer Setting Menu Screen.
3 Select the desired Weekly Timer function, and make settings, as required.
4 To exit the Weekly Timer mode, touch RETURN on the Weekly Timer Setting
Menu Screen.
5 To exit the Key Operator mode, touch RETURN on the Key Operator Mode
Screen to restore the Basic Screen.
13-28
NOTE:
If an invalid Weekly Timer master key code is entered, continue by
entering the valid 4-digit code.
[9] Weekly Timer (continued)
Weekly Timer Master Key Code Screen
Weekly Timer Setting Menu Screen