7155e133v1.fm 54 ページ 2001年11月28日 水曜日 午前11時53分
[20] Non-Image Area Erase Setting
Select the mode of Non-Image Area Erase function to be in effect when this feature
is selected on the Application Selection Screen after power is turned on or after
Auto Reset occurs.
Key Operator Mode Screen
Procedure
1 Touch [20] Non-image area erase setting on the Key Operator Mode Screen
to display the Non-Image Area Erase Setting Screen.
2 Select the desired erase mode and original density level.
Touch AUTO to let the machine select the erase mode and density level
automatically.
To specify the erase mode manually, touch Oblique erase or Rectangle erase ,
as desired, then select the density level required. Five exposure levels are
provided.
3 Touch OK to complete the setting and restore the Key Operator Mode Screen.
4 If no further changes are required, touch RETURN to restore the Basic Screen
to perform copying operations.
13-54
NOTE:
Select AUTO mode if the specified Oblique or Rectangle Erase mode
does not function properly due to the type of set original.
Non-Image Area Erase Setting Screen