7155e12v1.fm 6 ページ 2001年11月27日 火曜日 午後4時46分
Inserting a New Staple Cartridge into FS-110/210 Finisher (continued)
3.
Pull up the cartridge housing, then remove it while sliding it along
the stapler rail.
4.
Remove the empty cartridge from the cartridge housing.
5.
Insert the new cartridge into the housing.
Firmly insert the cartridge into the housing while aligning the arrow sides of
both case and housing.
12-6
2
Please Be Reminded!
Do not remove the staples remaining inside the housing; otherwise, the
first sheet output after the replenishment will not be stapled.
1