Konica Minolta 7165 Instruction Manual page 328

7155e132v1.fm 24 ページ ２００１年１１月２７日 火曜日 午後４時５８分
To specify special size;
(1) Touch Special size setting on the Paper Type Setting Screen to display the
Special Size Setting Screen.
(2) Touch the desired paper tray to highlight it.
(3) Touch a paper size key to specify a paper size for the selected tray.
• Select STD size to allow the machine to automatically detect the size of
paper loaded in the tray and indicate it on the tray key.
• Select STD size (special) to display the popup menu to show available
paper sizes to be specified. Use arrow keys on the popup menu to select
the desired size.
• Select Non STD size to display the popup menu to enter the paper size by
using arrow keys or touch screen keypad.
• Select Wide size paper to display the popup menu to show available wide
paper sizes to be specified. Use arrow keys on the popup menu to select
the desired wide size, then touch Input size to display the popup menu to
enter the paper size by using arrow keys or touch screen keypad.
Touch Lead edge or Rear edge to select the image starting position.
3 Touch OK on the Paper Type Setting Screen or on the Special Size Setting
Screen to complete the setting and return to the Key Operator Mode Screen.
4 If no further changes are required, touch RETURN to restore the Basic Screen
to perform copying operations.
13-24
[6] Paper Type / Special Size Set (continued)