Repeating Selected Image Area (Repeat: Vert./Horiz. Mode); R Epeating Selected Image Area (Repeat: Vert./Horiz. Mode) - Konica Minolta 7165 Instruction Manual

Repeating Selected Image Area (Repeat: Vert./Horiz. Mode)

Use this function to repeat the selected image area of 10mm ~ 150mm in
both vertical and horizontal widths measured from the rear left corner of the
A3 original area indicated on the left edge of the platen glass.
>>>Vertical/Horizontal Width Setting Mode Specifications<<<
❒ Use the platen glass. (Document feeder cannot be used.)
❒ Incompatible Conditions: Using RADF, 2 s 2, 2 s 1, APS, AMS, Rotation,
Group, Rotation Sort, Rotation Group, Mixed Original, Z-Folded Original,
Sheet/Cover Insertion, Chapter, Combination, Booklet, OHP Interleave,
Image Insert, Dual Page, Non-Image Area Erase, Frame/Fold Erasure,
AUTO Layout, Reduce & Shift in Image Shift, Stamp/Overlay
Horizontal width
1.
Touch APPLICATION on the Basic Screen.
When starting a new copying job, be sure to close the RADF securely,
then press [ AUTO RESET ].
2.
Touch Repeat on the Application Selection Screen.
The Repeat Mode Selection Screen will be displayed.
Vertical/Horizontal Width Setting mode
Vertical
width
Please Be Reminded!
Repeat copy
9-33
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Program Job
Non-Image
Area Erase
Reverse
Image
9
Applications
Repeat
Frame/Fold
Erasure
AUTO
Layout
Full-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
Overlay
Memory