All Count Reset [2] - Konica Minolta 7075 Instruction Manual

Section 12 : Key Operator Mode
E.K.C. (Electronic Key Counter) Function Setting [4] (continued)
E.K.C. All Count Reset [2]
Reset the count for all EKC accounts.
EKC Setting Menu Screen
Procedure
1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode .
Enter a 4-digit key operator password, then touch OK to display the Key Operator
Mode Screen. (See note 1.)
2 Touch [4] E.K.C. function setting . The EKC Master Key Code Screen displays, if a
code is required.
3 Enter your 8-digit EKC master key code, then touch OK to display the EKC Setting
Menu Screen. (See note 2.)
4 Touch [2] E.K.C. all count reset . The EKC All Count Reset Screen will be displayed.
5 Touch YES to reset all counters to zero and to return to the EKC Setting Menu
Screen.
Or, touch NO to cancel. Touching PREVIOUS SCREEN will also cancel this function
and return to the EKC Setting Menu Screen.
6 If other EKC setting changes are required, touch desired key, from [1]~[3].
7 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen. If other key
operator settings are required, select the desired menu item, from [1] to [18].
8 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
NOTES:
1 If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 If an invalid EKC master key code is entered, continue by entering the valid 8-digit code.
12 - 20
EKC All Count Reset Screen