Konica Minolta 7165 Instruction Manual page 255

Storing an Overlay Image in HDD / Overlaying Image Stored
The machine automatically starts to store the overlaying image data in the
HDD. The Overlaying Image Selection Screen will resume when the storing
function is completed.
To continue to store the overlaying image data, return to step 4 .
9.
Touch to select the desired overlaying image data, then touch OK .
The Stamp/Overlay Selection Screen will be restored.
If the IMAGE DELETE key is displayed on the Overlay Image Selection
Screen, you can delete the stored image and name. Select the image
name using up/down arrow key to scroll, then touch IMAGE DELETE .
10.
Touch OK to return to the Application Selection Screen.
11.
Touch OK to return to the Basic Screen.
The Store mode is automatically selected, and APS and AMS are released.
Set the desired conditions on the Basic Screen.
12.
Enter the desired print quantity from the control panel keypad.
See p. 3-6 for details on setting print quantity.
13.
Position the original(s) to be overlaid.
Position the original FACE UP in the document feeder or FACE DOWN on the
platen glass.
14.
Press [ START ] to scan.
15.
Repeat steps 13 and 14 for all originals.
16.
Touch STORE to exit the Store mode, then press [ START ] to print.
in HDD (Overlay Memory) (continued)
FOR DETAILS: Image Delete Key on the Overlay Image Selection
Screen
HINT
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Program Job
Non-Image
Area Erase
Reverse
Image
9
Applications
Repeat
Frame/Fold
Erasure
AUTO
Layout
Full-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
Overlay
Memory
9-67