Konica Minolta 7165 Instruction Manual page 248

7155e093v1.fm 60 ページ ２００１年１１月２７日 火曜日 午後４時２３分
5.
Touch OK .
The Stamp/Overlay Selection Screen will be restored.
Touch to select another stamp function key to use in combination, if desired.
6.
Touch OK on the Stamp/Overlay Selection Screen.
The Application Selection Screen will be restored.
7.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
8.
Enter the desired print quantity from the control panel keypad.
9.
Position original(s) FACE UP in the document feeder or FACE
DOWN on the platen glass.
10.
Press [ START ].
9-60
Printing Watermark onto Copies (Stamp) (continued)
HINT
See p. 3-6 for details on setting print quantity.
HINT
For details on positioning originals, see p. 3-2 to p. 3-5.
CAUTION
When the finisher / paper exit tray capacity is exceeded due to
the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.