Konica Minolta 7165 Instruction Manual page 100

7155e033v1.fm 42 ページ ２００１年１１月２８日 水曜日 午前１１時１５分
Output Mode for Machine without Finisher (continued)
(3) Touch OK .
The Basic Screen will be restored, with OUTPUT MENU highlighted.
3.
Select additional copy conditions, as desired.
4.
Enter the desired print quantity from the control panel keypad.
5.
Position original(s) FACE UP in the document feeder or FACE
DOWN on the platen glass.
6.
Press [ START ].
Press [ STOP ] to suspend the scanning or printing job.
3-42
HINTS
• See p. 11-3 to be sure that the exit tray capacity is not exceeded.
• See p. 3-6 for details on setting print quantity.
HINT
See p. 3-2 to p. 3-5 for details on positioning originals.
CAUTION
When the paper exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
FOR DETAILS: Output Icons on the Basic Screen
Face Down
Non-sort Rotation sort
Face Up
Non-sort Rotaion sort
Group Rotation group
Group Rotation group