Konica Minolta 7165 Instruction Manual page 348

7155e133v1.fm 44 ページ ２００１年１１月２８日 水曜日 午前１１時５３分
[13] Memory Switch Setting (continued)
[32] E.K.C. password input timing
Set the input timing for the EKC password.
[33] Key click sound (No paper/JAM)
Select the duration of the buzzer for alerting that the machine has stopped being
out of paper or due to paper misfeed.
[34] Reserve copy function
Set the selection for the reserve job setting.
[35] Scan stop by a pull out tray
Select to stop or continue the scanning job when a tray is pulled out.
[36] Change page no. pos. (booklet)
Set the machine to position the page numbers automatically on the outside edges
of the copy when using Booklet with Page Numbering in Stamp.
[37] Trimmer (STD/ Non STD size)
(Function invalid)
Set the machine to allow trimming the folded or stapled & folded sheets in non-
standard size (or wide size).
[38] Timer which prohibits Printer
Set the timer to allow the printing job after operating the copying job.
[39] Bookmark function
Select to set the Bookmark function only for the current job, set for all the following
jobs, or deactivate the function.
[40] Delete of overlay image
In Overlay Memory setting, select to permit or prohibit deleting the selected image
data previously stored in HDD, and also overwriting the data of the same name
when storing new data in HDD.
[41] Orig. direction/binding mode
Select to reset or save the original direction and bind position settings made on the
Special Original popup menu and Output Mode popup menu after completion of each
copying job.
13-44