Programming Different Settings For An Output Job (Program Job); P Rogramming Different Settings For An Output Job (Program Job) - Konica Minolta 7165 Instruction Manual

7155e092v1.fm 26 ページ ２００１年１１月２７日 火曜日 午後４時１５分

Programming Different Settings for an Output Job (Program Job)

In the ordinary Store mode, the combined features selected for the job are
applied to all originals to be scanned. In the Program Job mode, you may
scan multiple sets of originals and apply different settings on each set
(referred to as JOB), then output them all as a complete set.
>>>Specifications for Program Job<<<
❒ Max. 100 JOBs can be programmed for an output job.
❒ Once specified, paper size and the paper type/size setting for Multi-sheet
bypass tray cannot be changed for another JOB.
❒ Output mode and print quantity setting cannot be specified for each JOB.
The last setting made will be applied to all JOBs.
❒ Program Job settings cannot be stored in Job Memory.
❒ Incompatible Conditions: APS, Change paper size, Rotation, Group, Rota-
tion Sort, Rotation Group, Fold, Stitch & Fold, Punch, Three-Fold, Server
function, Mixed Original, Sheet/Cover Insertion, Chapter, Combination,
Booklet, OHP Interleave, Image Insert, Dual Page, 2/4/8 Repeat in Repeat,
Overlay, Storing image in Overlay Memory
1 2
JOB A
1.
Touch APPLICATION on the Basic Screen.
9-26
5 6
3 4
1 2 1 2
JOB B JOB C
Please Be Reminded!
When starting a new copying job, be sure to close the RADF securely,
then press [ AUTO RESET ].
9 10
7 8
5 6
3 4
9 10
7 8
5 6
3 4
1 2
5 6
3 4
1 2
1 2
Copied set