Konica Minolta 7165 Instruction Manual page 213

Dividing an Image into Right and Left Pages (Dual Page) (continued)
Use platen glass for scanning original for cover.
1 Open the document feeder.
2 Position original for front cover FACE DOWN on the platen glass.
3 Press [START] to start scanning.
4 When Front/Back Cover + Facing pages is selected, scan original for
back cover according to the above steps 2 and 3.
5 Use platen glass or document feeder, as required, for scanning body
text originals.
To output the set in the same order as the originals, start scanning
from the first page.
6 Press [START] to start scanning.
7 Repeat steps 5 and 6 for subsequent originals.
Front cover + Facing pages
Front/Back cover + Facing pages
Front cover + Facing pages
Scan front cover
Front/Back cover + Facing pages
Scan front cover
NOTES:
• Memory overflow may occur during scanning. See p. 5-11 to p. 5-12.
• When using platen glass, Non-Image Area Erase and AUTO Layout
are automatically selected. DO NOT CLOSE the document feeder
throughout the scanning job.
Scanning Original for Cover
SURVEYOR'S
Scan from
REPORT
first page
SURVEYOR'S
REPORT
Scan body text
SURVEYOR'S
REPORT
Scan back cover
10
8 9
6 7
4 5
2 3
1
SURVEYOR'S
REPORT
Copies
SURVEYOR'S
Scan from
SURVEYOR'S
REPORT
REPORT
first page
10
8 9
6 7
4 5
2 3
1
SURVEYOR'S
REPORT
Copies
SURVEYOR'S
REPORT
Scan body text
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
10
8 9
6 7
4 5
2 3
1
Dual Page
Program Job
Copies
Non-Image
Area Erase
Reverse
Image
9
Applications
Repeat
10
8 9
6 7
4 5
2 3
Frame/Fold
1
Erasure
AUTO
Layout
Copies
Full-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
Overlay
Memory
9-25