Konica Minolta 7165 Instruction Manual page 11

Features of the Konica 7155/7165 (continued)
• Counter List
Displays on the screen and prints the following data: total counter of the
machine, copier counter, print counter and the date when the counter
started.
• Density Shift
Shifts each of nine density levels in four density modes (Auto, Text, Photo,
Increase Contrast) to three levels lighter or three levels darker.
• Dual Page
Copies both pages of an open book or book-size sheet separately onto two
A4 sheets in 1 s 1 mode or separately onto each side of one A4 sheet in
1 s 2 mode. You can use the Dual Page mode with the Front or Front/Back
cover mode. The cover page(s) will be scanned and copied normally before
image division is performed on the other pages.
• Frame/Fold Erasure
Erases border and/or fold image area using Frame (1 - 300mm), Fold (1 -
99mm), or Frame & Fold.
• Full-Image Area
Makes copies printed completely to the edges of the paper to avoid image
loss.
• Image Insert
Stores pages in memory from the platen glass, and inserts the pages into a
document copied from the document feeder.
• Image Shift
Creates or removes a binding margin at the top, bottom, right and left edges
(shift amount from 0 ~ 250mm, in 1mm increments); reduces image to prevent
image loss (reduce & shift amount from 0 ~ 250mm, in 1mm increments).
• Interrupt Copying
Interrupts copying-in-progress to perform an urgent copy, using any of the
copier features for the interrupt job.
• Job Memory
Programs up to 30 jobs and recalls each job by job number or name, as
needed. All compatible platen glass functions can be programmed into Job
Memory directly after they are selected.
• Job Status
Displays the Job Status Screen to view the current machine status, changes
the operation order of reserve jobs, deletes the unused reserve job, or dis-
plays the previous job list.
ix