Konica Minolta 7165 Instruction Manual page 174

7155e07v1.fm 26 ページ ２００１年１１月２８日 水曜日 午後５時３３分
6.
Position original(s) FACE UP in the document feeder or FACE
DOWN on the platen glass of the primary copier.
7.
Press [ START ] on the control panel of the primary copier.
The Sub icon (
to indicate that the two copiers will start working in tandem.
The tandem mode will be released automatically when the tandem mode
copying is completed, and the Master and Sub icons on each Basic Screen
will disappear.
7-26
Using Two Copiers in Tandem (continued)
HINT
See p. 3-2 to p. 3-5 for details on positioning originals.
) will display on the Basic Screen of the secondary copier
FOR DETAILS: Entering reserve job during Tandem mode copying
If scanning of the next reserved job is performed during the tandem
mode copying, that job will also be performed in the tandem mode. Up to
5 jobs including the present job can be reserved.
Interrupt mode during Tandem mode copying
Interrupt copying is available only on the copier with [ INTERRUPT ]
pressed. The tandem mode copying on the copier in interrupt mode will
be suspended until the interrupt copying is completed.
If the interrupt mode period is of long standing, the Allocation recovery
mode will activate to enable the other copier to handle the remaining
print quantity.