Konica Minolta 7165 Instruction Manual page 48

7155e02v1.fm 20 ページ ２００１年１１月２８日 水曜日 午前１０時３１分
3.
Place paper on the tray with the curl side turning up.
Load paper aligning it to the right side of the tray.
4.
While pressing the release knob, move the rear side guide plate
against the paper.
Release the release knob to lock the side guide plate.
5.
When paper is seated properly, close the paper feed roller.
6.
Push in the tray until it locks into place.
The indicator
2-20
Please Be Reminded!
• Do not load above the red line on the side guide plates.
• Be sure that the rear guide plate is correctly positioned according to
the paper size to be loaded; otherwise machine trouble may occur.
Please Be Reminded!
Be sure that the side guide plates are securely aligned to the paper;
otherwise the machine cannot detect the correct paper size, or copies
may not be punched in position.
" "
on the tray key will change to
Please Be Reminded!
Do not bump the tray into the main body; otherwise machine trouble may
be caused.
Loading Paper (continued)
" "
.