Konica Minolta 7165 Instruction Manual page 102

7155e033v1.fm 44 ページ ２００１年１１月２８日 水曜日 午前１１時１５分
Secondary (Sub) Tray:
q Face down non-sort exit outputs simplex copies and odd numbered
duplex copies face down, without offsetting the sorted sets.
w Face down group exit outputs multiple copies of each original face down,
without offsetting the grouped sets upon exit.
e Face up non-sort exit outputs simplex copies and odd numbered duplex
copies face up, without offsetting the sorted sets.
r Face up group exit outputs multiple copies of each original face up,
without offsetting the grouped sets upon exit.
Face down
non-sort
The copier is initially set to output to Primary (main) tray in Sort mode.
Follow the procedure on the next page to change the output mode, as
desired.
>>>Specification for Output Modes with Finisher<<<
❒ Incompatible with Sort mode: Using platen glass (unless Image Insert, Dual
Page, or Platen store mode is used), Fold, Stitch & Fold, Three-Fold, OHP
Interleave
❒ Incompatible with Staple-sort mode: Using platen glass (unless Image
Insert, Dual Page, or Platen store mode is used), Fold, Stitch & Fold, Three-
Fold, OHP Interleave
3-44
Output Mode for Machine with Finisher (continued)
Face down
group
HINT
See Section 7 for the output modes using Finisher options.
Please Be Reminded!
Using excessively curled paper or some types of thin paper in Staple-
sort mode may cause poor results in arrangement of the stapled sets.
3
2
1
Example:
Make 3 copied sets
Face up
non-sort
Face up
group