Original Form - Konica Minolta 7165 Instruction Manual

Copying Non-Standard Size Originals (Original Form) (continued)
3.
Touch the desired size key.
When selecting FULL AREA on the Non STD size mode menu, the
copier scans the whole area of the platen glass and copies with the
paper size or magnification ratio currently selected.
4.
Touch OK on the popup menu to complete the setting.
The popup menu will disappear.
5.
Touch OK to complete the setting and return to the Basic Screen.
6.
Load copy paper.
• To load tabbed copy paper in the Multi-sheet bypass tray, specify the
paper type as Tab paper. See p. 3-29 to p. 3-32.
To load tabbed copy paper in any other tray, specify the paper type as
Tab paper in the Key Operator mode. See p. 13-23 to p. 13-24.
• For the procedure of tabbed copy paper supply, see p. 2-26 to p. 2-28.
7.
Enter the desired print quantity from the control panel keypad.
See p. 3-6 for details on setting print quantity.
8.
Position original(s) FACE UP in the document feeder, or FACE
DOWN on the platen glass.
• See p. 3-3 to p. 3-5 for details on positioning originals.
• Use RADF store mode (p. 3-33 to p. 3-34) when the original count
exceeds 100.
9.
Press [START].
When the finisher / paper exit tray capacity is exceeded due to
the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
FOR DETAILS
HINTS
HINT
HINTS
CAUTION
Original
Direction
Text/Photo
Enhance
Mixed
Original
Z-Folded
Original
Original
Form
8
Special
Original
8-11