Control Panel Adjustment; C Ontrol Panel Adjustment - Konica Minolta 7165 Instruction Manual

7155e133v1.fm 36 ページ ２００１年１１月２８日 水曜日 午前１１時５３分

[10] Control Panel Adjustment

Use this feature to check the malfunction of the LCD touch screen due to the shift in
position of the touch sensor.
Key Operator Mode Screen
Procedure
1 Touch [10] Control panel adjustment on the Key Operator Mode Screen to
display the Control Panel Adjustment Screen.
2 Touch the "+" indication at the upper right corner, then lower left corner on the
screen. The present coordinates will be displayed in the message area of the
screen.
3 Check that the X coordinate and Y coordinate displayed in the first line of the
message area fall within the standard value displayed in the second line.
4 Touch the CHECK BUTTONs at the upper left and lower right corners on the
screen to check if the buzzer tone functions normally.
5 If the coordinates fall out of the range of the standard value in step 3, or the
buzzer tone does not sound in step 4, repeat the adjustment procedure from 2
to 4.
6 Press [1] to restore the Key Operator Mode Screen.
7 If no further changes are required, touch RETURN to restore the Basic Screen
to perform copying operations.
13-36
NOTE:
When touching the "+" indications, it is recommended that you use a
sharp point such as a pencil to be much more accurate.
Control Panel Adjustment Screen