Konica Minolta 7165 Instruction Manual page 275

Recalling Image Data from HDD/PC (Image Recall) (continued)
Selecting WAIT OUTPUT :
(1)Touch OK .
When the data transmission is completed, the Basic Screen will be
displayed reflecting the settings made for that job.
(2)Enter the desired print quantity, then press [ START ] to print.
Selecting PROOF OUTPUT :
(1)Touch OK . The data transmis-
sion starts with the Basic
Screen restored.
When the data transmission is
completed, a sample copy is
output, then the Check Screen
will be displayed.
(2)Check the sample copy, then change the copy conditions if required.
Enter the desired print quantity, then press [ START ] to print.
Selecting AUTO OUTPUT :
(1)Touch OK . The popup menu to
enter the print quantity will be
displayed.
(2)Enter the desired print quantity,
then touch OK .
When the data transmission is
completed, the machine automatically starts to print.
FOR DETAILS
Key Operator can set the machine to return to the Recall Job Selection
Screen when printing job is completed, so that the data recalling can be
continued. See p. 13-39 to p. 13-45.
In this case, the Image
Data Recalling Screen
will be displayed while
the data is recalled.
On this screen, touch
CANCEL to suspend
recalling. On the popup
menu displayed, touch
YES to delete the data
recalled to DIMM, or touch NO to continue. The data stored in HDD/PC
will not be erased by this operation.
Server
Functions
Image
Store/Delete
Image
Store&Output
Image Recall
Image Edit
10
S erver
Function
10-19