Konica Minolta 7165 Instruction Manual page 110

7155e033v1.fm 52 ページ ２００１年１１月２８日 水曜日 午前１１時１５分
Checking Feature Selections and Proof Copying (continued)
Verify the settings made for the current job.
• When settings are OK, proceed to step 8 .
• When a set of sample copy is needed, proceed to step 6 .
• When making any setting change from the Check Screen, proceed to the
next step.
• When releasing any setting from the Check Screen, proceed to step 5 .
4.
To change the settings:
Touch the desired copying condition key on the Check Screen to highlight it.
Any key that cannot be highlighted indicates that the copying condition
cannot be changed from the Check Screen.
Touch CHANGE SETTING .
The LCD will display an appropriate screen to change the copying condition
selected.
Change the setting as desired, then restore the Check Screen to return to the
checking steps.
From the Basic Screen, press [ CHECK ] to return to the Check Screen.
From the Special Original popup menu or Change Application Selection
Screen, touch OK to return to the Check Screen.
• When making a set or sample copy, proceed to step 6 .
• To start printing without proofcopying, proceed to step 8 .
3-52
FOR DETAILS
• Selecting a basic copying condition key will display the Basic Screen.
• Selecting Enhance Mode , Special Orig. , or Original key will display
the Special Original popup menu.
• Selecting an application function key will display the Change
Application Selection Screen.
When BOOK MARK has been checked on a subsequent screen,
selecting the application function key will jump to that screen. See p.
9-2 for details.
• CHANGE SETTING will not function for the following application
functions, however they can be released by touching RELEASE
SETTING : Non-Image Area Erase, Reverse Image, AUTO Layout,
Full-Image Area, Overlay.