User Density Level 2 Setting; Special Size; Panel Contrast - Konica Minolta 7165 Instruction Manual

[2] User Density Level 2 Setting

Output copying samples from 16 density levels from Lighter to Normal or
Normal to Darker, then select the desired exposure and program it as
USER2.
The programmed copy density can be recalled by selecting USER2 on the
Basic Screen.
User Setting Mode Menu Screen
Procedure
1 Touch [3] User setting mode on the Key Operator Mode Screen to display the
User Setting Mode Menu Screen.
2 Touch [2] User density level 2 setting to display the User Density Level 2
Setting Screen.
3 Place the original on the platen glass.
4 Touch Darker or Lighter to select the density level to be programmed.
5 Touch No.1 1~4 , No.2 5~8 , No.3 9~12 , No.4 13~16 , or Set density ## , then
press [ START ]. The density level sample sheet will be output.
6 Select the desired exposure from the sample sheet(s), then enter the density
level No. by using the touch screen keypad.
7 Touch OK to complete the setting and return to the User Setting Mode Menu
Screen.
8 Touch RETURN to restore the Key Operator Mode Screen.
9 If no further changes are required, touch RETURN to restore the Basic Screen
to perform copying operations.
[3] User Setting Mode (continued)
User Density Level 2 Setting Screen
Key Operator
Mode
System Initial
Setting
Copier Initial
Setting
User Setting
Mode
E.K.C.
Lock/Delete
Job Memory
Paper Type/

Special Size

Panel Contrast/

Key Sound
Key Operator
Data Setting
Weekly
Timer
Control Panel
Adjustment
Tray Auto
Select Setting
Power Save
Setting
Memory
Switch
Machine
Management
List Print
Call Remote
Centre
Side 2 Lens
Adjustment
Finisher
Adjustment
HDD
Management
Scan
Transmission
Non-Image
Area Erase
13
Key Operator
Mode
13-13