Repeating Selected Image Area (Repeat: Vert./Horiz. Mode); Image Shift - Konica Minolta KM-7145 Instruction Manual

Repeating Selected Image Area (Repeat: Vert./
Horiz. Mode)
Use this function to repeat the selected image area of 10 mm ~ 150 mm in both vertical
and horizontal widths measured from the rear left corner of the A3 original area
indicated on the left edge of the platen glass.
Vertical/Horizontal Width Setting Mode Specifications
❒ Use the platen glass. (RADF cannot be used.)
❒ Incompatible Conditions: Using RADF, 2-2, 2-1, APS, AMS, Sort, Staple, Group, E-
SORT+Sort, E-SORT+Group, Mixed Original, Folded Original, Non-Standard Size,
Sheet/Cover Insertion, Chapter, Combination, Booklet, OHP Interleave, Image
Insert, Dual Page, Flip Side 2, Non-Image Area Erase, Frame/Fold Erasure, AUTO
Layout, Image Shift, Stamp, Overlay
Horizontal width
1.
Touch APPLICATION on the Basic Screen.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Touch Repeat on the Application Selection Screen.
The Repeat Mode Selection Screen will be displayed.
Vertical/Horizontal Width Setting mode
Vertical
width
Repeat copy
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Flip Side 2
Non-Image
Area Erase
Reverse
Image
Repeat
Frame/Fold
Erasure
AUTO
Layout
9
Applications

Image Shift

Reduce &
Shift
Stamp
Overlay
9-31