Repeating Selected Image Area (Repeat: Verti./Horiz. Mode) - Konica Minolta 7020 Instruction Manual

Repeating Selected Image Area (Repeat: Verti./Horiz. Mode)

Use this function to repeat the selected image area of 10mm ~ 150mm in both verti-
cal and horizontal widths measured from the rear right corner of the A3 original area
indicated on the right edge of the platen glass.
Vertical/Horizontal Width Setting Mode Specifications
❒ Use the platen glass. (Document feeder cannot be used.)
❒ Incompatible Conditions: Using RADF, 2s2, 2s1, APS, AMS, Sort, Staple, Group, E-
SORT+group, E-SORT+sort, Sheet/Cover Insertion, Chapter, Combination, Booklet,
OHP, Image Insert, Dual Page, Special Original (Mixed Original, Folded Original, Non-
standard Size, Flip Side 2), Frame/Fold Erasure, AUTO Layout, Image Shift, Non-image
Area Erase, Stamp
1
Press
APPLICATION
2
Touch
Selection Screen.
8-36
Vertical/Horizontal Width Setting mode
Horizontal width
on the control panel .
Repeat
on the Application
Vertical
width
Please Be Reminded! Please Be Reminded!
When starting a new copying
job, be sure to close the RADF
securely, then press
Repeat mode
AUTO RESET
.