Repeating Selected Image Area (Repeat: Vert./Horiz. Mode) - Konica Minolta BIZHUB PRO 1050 Operator's Manual

8
8.13 Repeating Selected Image Area (Repeat: Vert./Horiz.
Mode)
Use this function to repeat the selected image area of 10mm ~ 150mm in
both vertical and horizontal widths measured from the rear left corner of the
A3 original area indicated on the left edge of the original glass.
Vertical/Horizontal Width Setting Mode Specifications:
- Use the original glass. (Document feeder cannot be used.)
1
Touch [Application] on the Copy Screen.
Reminder
When starting a new copying job, be sure to close the ADF securely, then
press [Reset].
2
Touch [Repeat] on the Application popup menu.
The Repeat Screen will be displayed.
8-46
Vertical/Horizontal Width Setting mode
Horizontal width
Vertical
width
Applications
Repeat copy
bizhub PRO 1050