Repeating Selected Image Area (Repeat: Vert./Horiz. Mode); R Epeating Selected Image Area (Repeat: Vert./Horiz. Mode) - Konica Minolta 7022 Instruction Manual

Repeating Selected Image Area (Repeat: Vert./Horiz. Mode)

Use this function to repeat the selected image area of 10mm ~ 150mm in both vertical
and horizontal widths measured from the rear left corner of the A3 original area
indicated on the left edge of the platen glass.
>>>Vertical/Horizontal Width Setting Mode Specifications<<<
❒ Use the platen glass. (RADF cannot be used.)
❒ Incompatible Conditions: Using RADF, 2
SORT+sort, E-SORT+group, Sheet/Cover Insertion, Chapter, Combination, Booklet,
OHP , Image Insert, Dual Page, Special Original (Mixed Original, Folded Original, Non-
Standard Size, Flip Side 2), Frame/Fold Erasure, AUTO Layout, Image Shift, Non-
Image Area Erase, Stamp, Overlay
Horizontal width
1.
Press [APPLICATION] on the control panel.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Touch Repeat on the Application Selection Screen.
The Repeat Mode Selection Screen will be displayed.
Vertical/Horizontal Width Setting mode
Vertical
width
DATA
HELP
CHECK
APPLICATION
OUTPUT
AUTO RESET
Reminder!
2 , 2 1 , APS, AMS, Sort, Staple, Group, E-
a a
Repeat copy
FAX
1 2 3
INTERRU
4 5 6
7 8 9
0
STAR
CLEAR QTY.
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Image Insert
Dual Page
Mixed
Original
Folded
Original
Non-Standard
Size
Flip Side 2
Text/Photo
Enhance
Reverse
Image
Repeat
8
Applications
Frame/Fold
Erasure
AUTO
Layout
Image Shift
Reduce &
Shift
Non-Image
Area Erase
Stamp
Overlay
8-39