To Configure A Programmable Key As A Speed Dial Key For A Star/Hash Code - NEC DT820 Series User Manual

To c on fi gure a P rog r am m abl e K ey as a S p e ed D i al K e y
f or a st ar/ h as h co de
1
2
•
•
3
4
7 -78
P R O G R A M M A B L E K E Y S
Speed Dial and Programmable Keys
the Forwarding Star Code to forward all calls to a number. To activate the star code
sequence, you would then only need to press the Speed Dial Key.
For details on the star/hash code available for your system, contact your
Note:
system administrator.
Enter the programmable mode for your phone. The Feature key LED lights a steady red.
For information on how to enter the programmable mode for your phone, see
Note:
"Using the Feature Key" on page 7 -64.
Do one of the following:
ITY-6D Phones:
Press the programmable key that you want to set as a Speed Dial Key. The
programmable key LED flashes.
ITY-8LD and ITY-8LCGX Phones:
Press the Scroll Key to scroll to the desired page, then press the Speed Dial Key that you
want to edit. The programmable key LED flashes, and the Speed Dial information for the
key is shown.
If the Speed Dial has already been programmed, the name and number
Note:
information displays. You will need to edit the speed dial information, or add
the new information to a different Speed Dial Key. To edit the Speed Dial Key,
see "Editing Speed Dial Keys" on page 7 -79.
Use the telephone keypad to enter a name for the Speed Dial and press Enter
cursor pad or the OK softkey.
Up to 24 characters may be entered for the name.
• Press the Delete softkey to delete the last character entered, or press the
Cancel softkey to return to the previous screen.
• To switch between first letter uppercase, all uppercase, all lowercase and
numbers for keypad entry, press the
• To add a space to an entry, press
• To enter special characters, press the
For a list of special characters, see "Speed Dial and Personal Directory
Character Sets" in your phone's User Guide.
• To move the cursor position in the LCD screen, use the right and left cursor pad
keys.
Fewer than 24 characters may be displayed depending upon the contents of
Note:
the this field since a proportional font is used to display the field.
Use the telephone keypad to enter the star code or hash code, including any outside
access code and additional digits, for the entry and press Enter
the OK softkey.
Example: Enter *72818475559876 to set up a Speed Dial that forwards to the
external telephone number 1-847-555-9876.
Forwarding star code: *72
+
*
key on the keypad.
#
.
1
key.
b
b
on the
on the cursor pad or
DT820 Phone User Guide