Table of Contents
Advertisement
CHAPTER
Telephone Programming
9
Xen Alpha
S
1
ECTION
When the system is initially installed, it is fully operational with the preset default
settings. Users can customise the system by changing system programming values
I
NTRODUCTION
using either telephone programming or PC programming. This chapter provides
detailed instructions for programming from a telephone.
Telephone programming is designed primarily for experienced users. Therefore,
if you are a first-time user, we strongly recommend that you use PC
programming instead of telephone programming.
It should be noted that only one telephone can be in programming mode at a time. If
another telephone user attempts to access programming mode, that telephone is
blocked from entering programming mode.
The following Multiline telephone types can be used as programming telephones.
S
2
ECTION
Once you have entered into programming mode you can access the various
programming functions by either using the navigational keys or by manually entering
E
NTERING
the function number (e.g., 001-1, 002, 220, etc.). The function number provides access
P
ROGRAMMING
to the area you want to program. Table 9-1: Navigational Keys for Telephone
M
ODE
Programming provides a list of keys you can use to navigate the system. The following
tables provide a complete list of all of the programming functions.
To program the system using a telephone, you must first enter programming mode.
1.
2.
3.
Installation Manual, Chapter 9 – Telephone Programming
November 2003, A6-506000-642-01(8508), Release 6.0
DTB-16D-1A(WH) TEL
DTU-8D-1A(BK)/(WH) TEL
DTU-16D-1A(BK)/(WH) TEL
DTU-32D-1A(BK)/(WH) TEL
Only telephone ports 1 and 2 (normally extensions 10 or 11) can be used to enter
telephone program mode.
O
Press
.
M
Press
.
L J K
Dial
. The display shows the information for function number 001-1.
DTR-8D-1A(BK)/(WH) TEL
DTR-16D-1A(BK)/(WH) TEL
DTR-32D-1A(BK)/(WH) TEL
P001 SYS SETUP 1
Release 6.0
987654321
165
Advertisement
Table of Contents
