Conference Call; Call Logs; Do Not Disturb (If Applicable); Call Forward (If Applicable) - NEC UT880 Owner's Manual

Conference call

1. Access the MLC Dialer
2. Make or receive first Call (internal or external), when the call is connected,
3. Press the Conf soft key (on display)
4. Make or receive second call (internal or external)
5. Press Add soft key
6. Continue to follow steps 3 & 4 to add more callers OR
7. Press Begin soft key (on display) to join all calls

Call Logs

Access the MLC Dialer


Press Call Logs
 Select either All calls, or only the Missed calls to be displayed in the call logs.

The calls have three different icons showing three different call log types:
Incoming calls
o
Outgoing calls
o
Missed calls
o

Press the number you'd like to call (or to add to a contact)
 Press
Do Not Disturb
(if Applicable)
Access the MLC Dialer

Press DND key (system will automatically turn it on within 5 second

(to DND all))
To Cancel: Press DND (system will automatically turn it off within 5
second) Other options available:
Press DND key + 1 (sends External calls straight to vmail)

Press DND key + 2 (sends Internal calls straight to vmail)

Press DND key + 3 (sends All calls straight to vmail)

Press DND key + 0 (cancels DND)

Call Forward
(if Applicable)
Access the MLC Dialer

Press Call Fwd Key, then press 1

Enter another Extension; or 9 plus phone Number

Press Speaker Key

To Cancel: Press Call Fwd key, press 0
to call the Number or Dialer to return to the dialpad
Page 4 of 8
Service:
604 -856- 9155
Email:
service@natg.ca