Adjustment Of Edge Of Paper - Dell 3010CN Service Manual

2.2.2 Adjustment of edge of paper

When paper is set in a tray or cassette and carried to the toner transfer part as it is, transfer
cannot be made at appropriate position in some cases. REGI part aligns the edge of paper using
"Roll Loop" method.
When "Roll Loop" method is used, paper that passes through Pre Regi roll is applied to the stopped
Regi Roll and looped. When Regi Roll rotates while paper is looped, paper is fed from Regi Roll in
the state that the edge of paper are aligned.
6 - 19
Chapter 6 Principle s of O peration
Regi Roll
Pre Regi Roll
Leg_Sec06_051FA