Table of Contents
Advertisement
RRP14.20 ACTUATOR NO PAPER CST (PL 14.4.5)
[Removal]
1)
Remove 500 SHEET PAPER TRAY. (RRP 14.1)
2)
Remove 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
3)
Remove CLUTCH ASSY PH. (RRP 14.11)
4)
Remove DRIVE ASSY FEED. (RRP 14.9)
5)
Remove HOUSING ASSY FEED. (RRP 14.18)
6)
Release three hooks that fix CAP ACTUATOR (PL 14.4.3) to HOUSING ASSY FEED (PL
14.4.1) and remove CAP ACTUATOR.
7)
Remove two screws (silver, tap, 8mm) that fix COVER FEED (PL 14.4.13) to HOUSING ASSY
FEED.
8)
Remove COVER FEED from HOUSING ASSY FEED.
9)
Pull out the shaft of ACTUATOR NO PAPER CST (PL 14.4.5) from a hook of HOUSING ASSY
FEED, move it along with notched of HOUSING ASSY FEED and remove ACTUATOR NO
PAPER CST.
[Replacement]
When carrying out the work shown below, carefully check the relation between PHOTO
SENSOR: NO PAPER and ACTUATOR NO PAPER CST.
1)
Insert the shaft of ACTUATOR NO PAPER CST (PL 14.4.5) from the notched of HOUSING
ASSY FEED (PL 14.4.1).
2)
Insert ACTUATOR NO PAPER CST to the senser part of SENOR PHOTE: NO PAPER (PL
14.4.4), engage the shaft of ACTUATOR NO PAPER CST with a hook of HOUSING ASSY
FEED and attach it.
3)
Attach COVER FEED (PL 14.4.13) to HOUSING ASSY FEED.
4)
Fix COVER FEED on HOUSING ASSY FEED using two screws (silver, tap, 8mm).
5)
Match the hole of CAP ACTUATOR (PL 14.4.3) to the boss of HOUSING ASSY FEED and
attach CAP ACTUATOR.
6)
Attach HOUSING ASSY FEED. (RRP 14.18)
7)
Attach DRIVE ASSY FEED. (RRP 14.9)
8)
Attach CLUTCH ASSY PH. (RRP 14.11)
9)
Attach 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
10) Attach 500 SHEET PAPER TRAY. (RRP 14.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 336
Advertisement
Chapters
Table of Contents
