Table of Contents
Advertisement
RRP3.18 PHOTO SENSOR: T/R (PL 3.3.4)
[Removal]
1)
Remove 250 SHEET PAPER TRAY. (RRP 2.1)
2)
Remove 250 SHEET FEEDER LEFT COVER. (RRP 3.2)
3)
Remove CLUTCH ASSY PH. (RRP 3.7)
4)
Remove DRIVE ASSY FEED 250. (RRP 3.5)
5)
Remove HOUSING ASSY FEED. (RRP 3.14)
6)
Remove ROLL ASSY FEED. (RRP 3.19)
7)
Remove ACTUATOR. (RRP 3.17)
8)
Remove connector (P/J120) of PHOTO SENSOR: T/R (PL 3.3.4).
9)
Release the three hooks that fix PHOTO SENSOR: T/R to HOUSING ASSY FEED and
remove PHOTO SENSOR: T/R.
[Replacement]
1)
Match three hooks of PHOTO SENSOR: T/R to fitting position of HOUSING ASSY FEED and
attach it.
2)
Attach connector (P/J120) of PHOTO SENSOR: T/R.
3)
Attach ACTUATOR. (RRP 3.17)
4)
Attach ROLL ASSY FEED. (RRP 3.19)
5)
Attach HOUSING ASSY FEED. (RRP 3.14)
6)
Attach DRIVE ASSY FEED 250. (RRP 3.5)
7)
Attach CLUTCH ASSY PH. (RRP 3.7)
8)
Attach 250 SHEET FEEDER LEFT COVER. (RRP 3.2)
9)
Attach 250 SHEET PAPER TRAY. (RRP 2.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 97
Advertisement
Chapters
Table of Contents
