Table of Contents
Advertisement
RRP3.14 HOUSING ASSY FEED (PL 3.3.1)
[Removal]
1)
Remove 250 SHEET PAPER TRAY. (RRP 2.1)
2)
Remove 250 SHEET FEEDER LEFT COVER. (RRP 3.2)
3)
Remove CLUTCH ASSY PH. (RRP 3.7)
4)
Remove DRIVE ASSY FEED 250. (RRP 3.5)
5)
Release a hook of GEAR FEED (PL 3.2.4) fixed to the shaft of HOUSING ASSY FEED (PL
3.2.14) and remove GEAR FEED.
6)
Remove connector (P/J618) of HOUSING ASSY FEED.
7)
Remove a screw (silver, with a flange, 6mm) that fixes HOUSING ASSY FEED on 250 SHEET
FEEDER ASSEMBLY.
8)
Put both of your hands into the front side of 250 SHEET FEEDER ASSEMBLY to pull the
lever at two locations of HOUSING ASSY FEED toward you, and disengage the boss of
HOUSING ASSY FEED out of the hole of 250 SHEET FEEDER ASSEMBLY.
9)
Slide HOUSING ASSY FEED to front side, release the four hooks on 250 SHEET FEEDER
ASSEMBLY and remove the hole of HOUSING ASSY FEED from the front side convex of 250
SHEET FEEDER ASSEMBLY. Remove HOUSING ASSY FEED downwards.
[Replacement]
When carrying out the work shown below, be careful that ACTUATOR (PL 3.3.7) attached
to HOUSING ASSY FEED is not damaged.
1)
Match the hooks at four locations of HOUSING ASSY FEED to the fitting position and attach
250 SHEET FEEDER ASSEMBLY.
2)
Slide HOUSING ASSY FEED backwards and insert the boss of HOUSING ASSY FEED in the
hole of 250 SHEET FEEDER ASSEMBLY. Attach the convex of 250 PAPER FEEDER to the
front side hole of HOUSING ASSY FEED.
3)
Fix HOUSING ASSY FEED to 250 SHEET FEEDER ASSEMBLY using a screw (silver, with
a flange, 6mm).
4)
Attach connector (P/J618) of HOUSING ASSY FEED.
5)
Attach GEAR FEED to shaft of HOUSING ASSY FEED, and fix a hook of GEAR FEED in
groove of shaft of HOUSING ASSY FEED.
6)
Attach DRIVE ASSY FEED 250. (RRP 3.5)
7)
Attach CLUTCH ASSY PH. (RRP 3.7)
8)
Attach 250 SHEET FEEDER LEFT COVER. (RRP 3.2)
9)
Attach 250 SHEET PAPER TRAY. (RRP 2.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 87
Advertisement
Chapters
Table of Contents
