Table of Contents
Advertisement
RRP14.24 SEPARATOR ASSEMBLY (PL 14.3.25)
[Removal]
1)
Remove 500 SHEET PAPER TRAY. (RRP 14.1)
2)
Remove 500 SHEET FEEDER RIGHT COVER. (RRP 14.8)
3)
Remove 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
4)
Remove 500 SHEET FEEDER CHUTE ASSEMBLY. (RRP 14.7)
5)
Remove CLUTCH ASSY PH. (RRP 14.11)
6)
Remove DRIVE ASSY FEED. (RRP 14.9)
7)
Remove HOUSING ASSY FEED. (RRP 14.18)
8)
Remove CHUTE ASSY RETARD. (RRP 14.29)
Try not to be break the boss of LEVER when carrying out the work shown below.
Be sure not to be loose SPRING LEVER when carrying out the work shown below.
Pay attention to fitting direction of LEVER when carrying out the work shown below.
9)
Depress the boss parts on both sides of LEVER (PL 14.3.28) and take out LEVER and
SPRING LEVER (PL 14.3.27) from CHUTE ASSY 500 (PL 14.3.38).
Try not to be break the boss of SEPARATOR ASSEMBLY when carrying out the work
shown below.
Be sure not to be loose SPRING RETARD when carrying out the work shown below.
10) Depress the boss parts on both side of SEPARATOR ASSEMBLY (PL 14.3.25), remove
SEPARATOR ASSEMBLY from CHUTE ASSY 500.
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 345
Advertisement
Chapters
Table of Contents
