Table of Contents
Advertisement
RRP7.3
ANTENNA ASSY (PL 7.1.10)
[Removal]
1)
Remove 2ND BTR ASSY. (RRP 6.4)
2)
Remove LEFT COVER. (RRP 1.10)
3)
Remove PWBA MCU. (RRP 12.6)
4)
Remove CHASSIS ASSY ESS. (RRP 12.10)
5)
Remove LEFT IBT GUIDE ASSEMBLY. (RRP 7.2)
6)
Release hook that fixes ARM-COUPLING (PL 7.1.7) to LEFT IBT GUIDE ASSEMBLY (PL
7.1.4) and remove ARM-COUPLING from the shaft of LEFT IBT GUIDE ASSEMBLY
together with SPRING-TORSION ARM (PL 7.1.8).
7)
Rotate ARM-COUPLING at 90 degrees and remove ARM-COUPLING.
8)
Release hook that fixes ANTENNA ASSY (PL 7.1.10) to LEFT IBT GUIDE ASSEMBLY and
remove ANTENNA ASSY.
9)
Remove connector (P/J109) of ANTENNA ASSY.
[Replacement]
1)
Attach connector (P/J109) of ANTENNA ASSY (PL 7.1.10).
2)
Match the hole in ANTENNA ASSY to the boss of LEFT IBT GUIDE ASSEMBLY (PL 7.1.4),
and attach ANTENNA ASSY and fix it with hook.
3)
Attach SPRING-TORSION ARM (PL 7.1.8) to ARM-COUPLING (PL 7.1.7) and place the oval
hole of ARM-COUPLING in the shaft of LINK-COUPLING (PL 7.1.9).
4)
Rotate ARM-COUPLING at 90 degrees, attach it to the shaft of LEFT IBT GUIDE
ASSEMBLY with hook and hook SPRING-TORSION ARM to the notched of LEFT IBT
GUIDE ASSEMBLY.
Be sure to hook SPRING-TORSION ARM to ARM-COUPLING and LEFT IBT GUIDE
ASSEMBLY properly.
5)
Remove LEFT IBT GUIDE ASSEMBLY. (RRP 7.2)
6)
Attach CHASSIS ASSY ESS. (RRP 12.10)
7)
Attach PWBA MCU. (RRP 12.6)
8)
Attach LEFT COVER. (RRP 1.10)
9)
Attach 2ND BTR ASSY. (RRP 6.4)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 220
Advertisement
Chapters
Table of Contents
