Table of Contents
Advertisement
RRP5.12 CLUTCH ASSY PH: PRE REGI (PL 5.2.22)
[Removal]
1)
Remove VERTICAL TRANSPORT ASSEMBLY. (RRP 5.3)
2)
Remove MOTOR-PH. (RRP 5.11)
3)
Remove GEAR ASSY DRIVE. (RRP 5.14)
4)
Remove connector (P/J202) of CLUTCH ASSY PH: PRE REGI (PL 5.2.22) and remove harness
of CLUTCH ASSY PH: PRE REGI from the groove of VERTICAL TRANSPORT ASSEMBLY.
5)
Remove an E ring that fixes CLUTCH ASSY PH: PRE REGI to VERTICAL TRANSPORT
ASSEMBLY.
6)
Remove CLUTCH ASSY PH: PRE REGI from VERTICAL TRANSPORT ASSEMBLY, and
remove the harness of CLUTCH ASSY PH: PRE REGI from the hole in VERTICAL
TRANSPORT ASSEMBLY.
[Replacement]
1)
Insert the harness of CLUTCH ASSY PH: PRE REGI into the hole in VERTICAL
TRANSPORT ASSEMBLY.
2)
Match the hole position of CLUTCH ASSY PH: PRE REGI to the D-cut section of the shaft of
ROLL ASSY-PRE REGI (PL 5.2.12), and attach CLUTCH ASSY PH: PRE REGI in such a
manner that the convex of VERTICAL TRANSPORT ASSEMBLY is placed in the concave of
CLUTCH ASSY PH: PRE REGI.
3)
Fix CLUTCH ASSY PH: PRE REGI to VERTICAL TRANSPORT ASSEMBLY using an E ring.
4)
Attach connector (P/J202) of CLUTCH ASSY PH: PRE REGI, and lay the harness of CLUTCH
ASSY PH: PRE REGI to the groove of VERTICAL TRANSPORT ASSEMBLY.
5)
Attach GEAR ASSY DRIVE. (RRP 5.14)
6)
Attach MOTOR-PH. (RRP 5.11)
7)
Attach FRAME-ASSY-PH. (RRP 5.3)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 181
Advertisement
Chapters
Table of Contents
