Table of Contents
Advertisement
RRP12.7 LOW/HIGH VOLTAGE POWER SUPPLY (PL 12.2.6)
[Removal]
1)
Remove LEFT COVER. (RRP 1.10)
2)
Remove all connectors on LOW/HIGH VOLTAGE POWER SUPPLY (PL 12.2.6).
3)
Remove six screws (silver, with a flange, 6mm) that fix LOW/HIGH VOLTAGE POWER
SUPPLY to the main unit.
4)
Remove the upper part of LOW/HIGH VOLTAGE POWER SUPPLY from the convex of the
bracket on the main unit, remove LOW/HIGH VOLTAGE POWER SUPPLY.
[Replacement]
1)
Attach the upper part of LOW/HIGH VOLTAGE POWER SUPPLY to the convex of the
bracket on the main unit, attach LOW/HIGH VOLTAGE POWER SUPPLY.
2)
Fix LOW/HIGH VOLTAGE POWER SUPPLY to the main unit using six screws (silver, with a
flange, 6mm).
3)
Attach all connectors on LOW/HIGH VOLTAGE POWER SUPPLY.
4)
Attach LEFT COVER. (RRP 1.10)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 289
Advertisement
Chapters
Table of Contents
