Table of Contents
Advertisement
RRP9.2
TONER CARTRIDGE SENSOR (PL 9.1.6)
[Removal]
1)
Remove COVER ASSY RH. (RRP 1.12)
2)
Remove LEFT COVER. (RRP 1.10)
3)
Remove MULTIPURPOSE FEEDER COVER. (RRP 1.7)
4)
Remove LOWER FRONT COVER and COVER FRONT-U. (RRP 1.8)
5)
Remove ANTENNA CTRG. (RRP 9.3)
6)
Remove the two screws (silver, with a flange, tap, 8mm) that fix TONER CARTRIDGE
SENSOR (PL 9.1.6) to the main unit.
7)
Push the boss that fix TONER CARTRIDGE SENSOR to the main unit and remove TONER
CARTRIDGE SENSOR.
[Replacement]
1)
Attach the toner cartridge disturbing in the fitting position of TONER CARTRIDGE SENSOR
(PL 9.1.6).
2)
Match the boss part of TONER CARTRIDGE SENSOR to the fitting positions and attach it to
the main unit.
3)
Push TONER CARTRIDGE SENSOR from inside of the main unit (hole of the DEVELOPER
ROTOR FRAME ASSEMBLY(PL 9.2.9) and fit the boss section of TONER CARTRIDGE
SENSOR into the hole of the main unit.
4)
Fix TONER CARTRIDGE SENSOR to the main unit using the two screws (silver, with a
flange, tap, 8mm).
5)
Attach ANTENNA CTRG. (RRP 9.3)
6)
Attach LOWER FRONT COVER and COVER FRONT-U. (RRP 1.8)
7)
Attach MULTIPURPOSE FEEDER COVER. (RRP 1.7)
8)
Attach LEFT COVER. (RRP 1.10)
9)
Attach COVER ASSY RH. (RRP 1.12)
10) Attach the toner cartridge.
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 239
Advertisement
Chapters
Table of Contents
