Details Of Ess Diagnosis; Executing Ess Diagnosis; Coderom Test; Fontrom Test - Dell 3010CN Service Manual

Hide thumbs Also See for 3010CN:
Table of Contents

Advertisement

4.1 Details of ESS Diagnosis

This section describes what is performed in each test of the ESS diagnosis in detail.

4.1.1 Executing ESS Diagnosis

1)
The power is turned off.
2)
The power is turned on while holding down "
3)
Release the keys when "Diagnosing" is displayed.
4)
The "Customer Mode" and "ESS Diagnosis" are displayed. (Entered the Diagnosis.)
5)
Press "
" key.
6)
Press "
" key to select the test item.
7)
Press "
" key twice. (Executed the test)

4.1.2 CodeROM Test

This test calculates the checksum of the each ROM, and compares it with the valid checksum
value stored in the corresponding chip beforehand. When the checksum is identical to the stored
value, this test judges the chip is normal.
Normal
CHECK OK

4.1.3 FontROM Test

This test calculates the checksum of the each FontROM, and compares it with the valid checksum
value stored in the corresponding chip beforehand. When the checksum is identical to the stored
value, this test judges the chip is normal.
Normal
CHECK OK

4.1.4 EEPROM Test

When this test reads a predefined address of the EEPROM and does not find the initialization
mark, it performs read/write/verify of the increment data for the whole area of the EEPROM. If
the intialization is completed, the test performs read/write/verify of the test patterns (0xffffffff,
0xaaaaaaaa, 0x55555555, 0x0000000) for the area used by the diagnosis except the area for the
mark.
Normal
CHECK OK
CodeROM #* ERROR
S=xxxx V=yyyy
(xxxx:calculated value yyyy:ROM stored value #*:0,1)
FontROM ERROR
S=xxxx V=yyyy
(xxxx:calculated value yyyy:ROM stored value)
EEPROM ID* ERROR (ID*:1,2)
2 - 10
Chapter 2 Operation of Diag.
" and "
" keys.
Error
Error
Error

Advertisement

Table of Contents
loading

Table of Contents