Table of Contents
Advertisement
Clutch and Solenoid name
(Diag. Code)
IBT Cleaner Retract
Motor (DO-1e)
NOTE: This procedure is for the technical staff. The
customer's procedure is the 1, 5 and 6.
1)
Turn on the power and enter the Diagnostic Mode..
2)
Open the Front door and the Top Cover, and then remove the
IBT.
3)
Cheat the safety Interlock System.
4)
Execute the DO-1e. Confirm the moving of the IBT Cleaner
Retract. (The customer can confirm the motor noise only.)
5)
Press the "Cancel" key to stop motor.
6)
Remove the cheater and reseat the IBT.
7)
Close the Top Cover and the Front Door.
2 - 53
Chapter 2 Operation of Diag.
Confirmation procedure
IBT Cam Assembly
Leg_Sec02_055FA
Advertisement
Chapters
Table of Contents
