Dell 3010CN Service Manual page 231

Hide thumbs Also See for 3010CN:
Table of Contents

Advertisement

RRP4.5
PLATE BOTTOM ASSY MSI (PL 4.1.13)
[Removal]
1)
Remove COVER ASSY RH. (RRP 1.12)
2)
Remove LEFT COVER. (RRP 1.10)
3)
Remove MULTIPURPOSE FEEDER COVER. (RRP 1.7)
4)
Remove LOWER FRONT COVER and COVER FRONT-U. (RRP 1.8)
5)
Remove VERTICAL TRANSPORT ASSEMBLY. (RRP 5.3)
6)
Remove MULTIPURPOSE FEEDER ASSEMBLY. (RRP 4.1)
7)
Remove SOLENOID PICK UP. (RRP 4.8)
8)
Remove MULTIPURPOSE ROLLER ASSEMBLY. (RRP 4.11)
9)
Spread right and left fitting parts of PLATE BOTTOM 2 (PL 4.1.12) from PLATE BOTTOM
ASSY MSI (PL 4.1.13) and remove the hole of PLATE BOTTOM 2 from the boss of PLATE
BOTTOM ASSY MSI.
10) Lift up PLATE BOTTOM ASSY MSI and remove right and left hole of PLATE BOTTOM
ASSY MSI from right and left shaft of MULTIPURPOSE FEEDER ASSEMBLY (PL 4.1.1).
11) Remove the right side of PLATE BOTTOM ASSY MSI from the right notched of
MULTIPURPOSE FEEDER ASSEMBLY and remove PLATE BOTTOM ASSY MSI.
[Replacement]
1)
Match the left side of PLATE BOTTOM ASSY MSI to the fitting position at left side of
MULTIPURPOSE FEEDER ASSEMBLY, and insert the right side of PLATE BOTTOM ASSY
MSI to the right side notched of MULTIPURPOSE FEEDER ASSEMBLY.
When carrying out the work shown below, slight raise the rear of PLATE BOTTOM ASSY
MSI. This helps carry out the work more easily.
2)
Place the right and left holes on PLATE BOTTOM ASSY MSI in the right and left shafts of
MULTIPURPOSE FEEDER ASSEMBLY and attach PLATE BOTTOM ASSY MSI.
3)
Spread fitting parts at right and left sides of PLATE BOTTOM 2, place the hole of PLATE
BOTTOM 2 in the boss of PLATE BOTTOM ASSY MSI and attach PLATE BOTTOM 2.
4)
Attach MULTIPURPOSE ROLLER ASSEMBLY. (RRP 4.11)
5)
Attach SOLENOID PICK UP. (RRP 4.8)
6)
Attach MULTIPURPOSE FEEDER ASSEMBLY. (RRP 4.1)
7)
Attach VERTICAL TRANSPORT ASSEMBLY. (RRP 5.3)
8)
Attach LOWER FRONT COVER and COVER FRONT-U. (RRP 1.8)
9)
Attach MULTIPURPOSE FEEDER COVER. (RRP 1.7)
10) Attach LEFT COVER. (RRP 1.10)
11) Attach COVER ASSY RH. (RRP 1.12)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 133

Advertisement

Table of Contents
loading

Table of Contents