3Rd Party Mode; Power Save Function - Dell 3010CN Service Manual

rd
10.7 3 Party Mode
When life of toner cartridge has ended, the printer stops accepting print request (life of toner car-
tridge is counted by the counter in CRUM). Taking into consideration that some users use refilled
toner cartridges, the printer can accept print request by the user's panel operation even if life of
toner cartridge has ended. When the mode has changed so that the printer does not stop even after
life of toner cartridge ends, the printer displays a message on the operation panel to inform the user
of the mode change. When the printer operates in this mode, print image quality is not guaranteed.
Also, remaining toner level is not displayed (as CRUM data can not be guaranteed).

10.8 Power Save Function

10.8.1 Power Save Mode
Mode
Power Save Mode (30W
or less)
10.8.2 Transfer Time to Power Save Mode
Mode Transfer
From Standby Mode to
Power Save Mode
10.8.3 Recovery from Power Save Mode
When the printer receives a print job or any button on the operation panel is pressed, the printer
recovers from the Power Save mode and enters the Ready mode.
Fusing: pause, Exposing: pause, Recording: pause
Transfer Time
Selectable from 1 to 60 minutes by 1 minute
8 – 21
Chapter 8 Printer Specifications
Description
15minutes
Default