Table of Contents
Advertisement
Clutch and Solenoid name
(Diag. Code)
Tray 2 Clutch (DO-d9)
NOTE: Tray 2 Clutch is in the 250 or 500 sheets Option Tray.
1)
Turn on the power and enter the Diagnostic Mode.
2)
Execute the DO-d9. Upon hitting the "
noise of the clutch will be heard.
3)
Press the "Cancel" key to stop the clutch.
Combination test is as follows.
NOTE: The turn roll rotates when the DO-d9 and the DO-e8 are
executed. This procedure is for the technical staff.
1)
Turn on the power and enter the Diagnostic Mode.
2)
Execute the DO-d9 and the DO-e8.
3)
Open the Feeder Cover and confirm the Turn Roll rotation.
4)
Press the "Cancel" key to stop the motor.
5)
Press the "
" key to display the DO-d9.
6)
Press the "Cancel" key to stop the clutch, and close the Feeder
Cover.
2 - 61
Chapter 2 Operation of Diag.
Confirmation procedure
Turn Roll
" key, the operating
Leg_Sec02_066FA
Advertisement
Chapters
Table of Contents
